 |
 |
 |
|
Items |
Unit |
LG-Standard Type |
GB/T10699- |
JISA9510-1995 NO.1-22 | |||
|
HCS-17 |
HCS-20 |
HCS-23 |
HCS-25 | ||||
|
Bulk Density |
kg/m3 |
170 |
200 |
230 |
250 |
≤220, |
≤220 |
|
Flexural Strength |
MPa |
≥0.25 |
≥0.35 |
≥0.45 |
≥0.50 |
≥0.30 |
≥0.30 |
|
Thermal Cond |
W/m.k |
0.058 |
0.062 |
0.067 |
0.069 |
≤0.065 |
≤0.062 |
|
Temp. Limit |
℃ |
1000 |
1000 |
1000 |
1000 |
1000 |
1000 |
|
Linear Shrinkage |
% |
≤2 |
≤2 |
≤2 |
≤2 |
≤2 |
≤2 |
Products with max. service temp. of 650℃ are also available here.
| Based on 1000℃ LG-Standard Type，the temp. limited of this type is improved to 1100℃. As our paten, LG-High Temp. Type can be used for high temp position of industrial furnaces.. | |||
|
Items |
Unit |
LAIGE Brand | |
|
SCS-25 | |||
|
Bulk Density |
kg/m3 |
250±10% | |
|
Flexural Strength |
MPa |
≥0.50 | |
|
Temp. Limit |
℃ |
1100 | |
|
Linear Shrinkage |
% |
≤2(1050℃,3hrs) | |
|
Themal Cond |
W/m·k |
≤0.069 | |
|
Length(±3mm) |
Width(±3mm) |
Thickness(+3 -1.5 mm ) |
|
400 |
250 |
25-120 |
|
500 |
500 |
25-120 |
|
600 |
300 |
25-120 |
|
610 |
400、303、300、150 |
25-120 |
|
1000 |
500 |
25-120 |
|
1080 |
950 |
25-120 |
|
1220 |
1220 |
25-100 |
t,the mean temp. of hot surface and outer surface.
Please contact us if customers require other sizes and shaps orspecial machining.
*Auxiliary Products
BP-1 high temp. adhesive powder-blended with water glass to form a mortar for the tight connection between insulating slab and other constructural component.(BP-1 consumption: about 3.0kg/m2)
WP-1 waterproof agent-covered on the surface of ready-constructed slabs in order to spread castables on it .(WP-1 consumption: about 0.8kg/m2)
|
Items |
Unit |
Index |
|
Paste Density |
kg/m3 |
1000 |
|
Paste Bulk Drying Shrinkage |
% |
20 |
|
Temp. Limit |
℃ |
850/1000 |
|
Drying Density |
kg/m3 |
260 |
|
Themal Cond |
W/m·k |
0.065 |
Characterized by low drying shrinkage, good thermal stability, resisting alkali, weak acid corrosion and oil water soak, good adaptability, easy construction and no environmental pollution, LG-Paste Type insulation coating can be widely used for all types of furnaces, kiln, tower, pot, pipe, valve etc, especially easy construction for special-shaped equipment.
Also we have dry insulation coating and 1260C paste.
Construction Area:
Each ton paste can cover an area of 70-80m2 with 10mm thickness. The area of other thickness can be calculated from this.